CS2

'CS2 - Counterstrike 2 Gameserver - WIKI - - Here you will find the most important commands and help for your CS2 Gameserver @ CKRAS → CounterStrike 2 (CS2) : RCON Commands- Important SSH-Protect, *new* CKRAS BOT, FAKE RCON, CKRAS Performance Boost, CKRAS Quality+


- IMPORTANT: CKRAS BOT

Game Informationen

Editor: Valve Software
Releasedate: 27. September 2023
Description: Counter-Strike 2 (CS2) Since its release over 20 years ago, Counter-Strike has provided an unparalleled competitive experience that has been shaped by millions of players worldwide. Now the next chapter in the glorious CS story begins: Welcome to Counter-Strike 2.

HOW TO INSTALL CS2

Install CS2 to your Gameserver - Guide - In this article we describe the step-by-step how to install CS2 on your CKRAS Gameserver.

CKRAS BOT

NEW The CKRAS BOT helps you to manage your gameserver with simple commands like !map dust2, see here to learn more.

RCON Commands

For easy administration of your CS2 server we recommend: CKRAS BOT (pre-installed)

Find all availible CS2 CVARs in this Guide: 

Command	Description
rcon_password YOURRCONPASSWORD	Admin auth
exec nameCONFIG.cfg	Runs the configuration file and loads the settings and scripts it contains
map de_inferno	With map "name map" you change to the desired map.
mp_c4timer 40	how long from when the C4 is armed until it blows
mp_restartgame 5	If non-zero, game will restart in the specified number of seconds
mp_warmup_time "100"	With this command you set the warm-up time, the time stands for seconds 120 would be e.g. 2 minutes.
bot_add	Add Bots
mp_chattime	This sets the time for how long chat messages are displayed. Example: mp_chattime "5″.
mp_fadetoblack	This sets whether the screen goes black after death or not. Example: 0=off; 1=on
mp_decals	Anzahl der Details (z.B. Einsch
mp_freezetime	Sets the time in seconds when the players are allowed to start running when the round is restarted. Example: mp_freezetime "6″ = 6 seconds
mp_friendlyfire	Team players take damage when you shoot them. Note: 0=off; 1=on
mp_hostagepenalty	Indicates how many hostage killings are allowed on the server. Note: 0=off; 1=1 hostage murder; 2=2 hostage murders
sv_cheats	Allows the user to use some HL² cheat mods such as "GodMod" Note: 0=off, 1=on
noclip	You are invulnerable and can fly through anything. Note: Only possible with "sv_cheats 1″!
mp_allowspectators	Determines whether you can enter spectator mode. Note: 0=off; 1=on
sv_pausable	Determines whether everyone can pause the game. Note: 0=off; 1=on
changelevel MAPNAME	Changes the map. Example: changelevel de_dust
rcon say	Write text messages via the Console.
mp_footsteps	Step sounds. Note: 0=off; 1=on
mp_winlimit	Legt fest wieviele Runden ein Team Gewinnen muss bis die Map gewechselt wird. Bemerkung: 0=aus
sv_rcon_maxfailures	Legt fest nach wieviel falschen rcon Befehlseingaben jemand gebannt wird, z.B. wenn man das Passwort vorher nicht eingegben hat. Bemerkung: min=1; Standart=10; max=20
sv_rcon_minfailuretime	Zeiteinstellung für sv_rcon_maxfailures.
sv_rcon_minfailures	Wenn vor sv_rcon_minfailuretime so viele falsche Rcon Anfragen kommen, wird gebannt. Bemerkung: min=1; Standart=5; max=20
sv_rcon_banpenalty	Legt fest wie lange jemand gebannt wird bei falschen rcon Befehlseingaben. Bemerkung: 0=Permanent
users	Zeigt die User ID und Namen aller Spieler an.
kick	Kickt ein Spieler vom Server. Beispiel: kick Spielername; kick #id
banid	Bans a player from the server for x minutes according to his ID. Example: banid id x; x=0>permanent
banip	Bans a player from the server after his IP for x minutes. Example: banip x; x=0>permanent
quit	Startet den Server neu - Diesen BEFEHL BEI CKRAS NICHT NUTZEN, für Restart bitte das Webinterface nutzen.
reload	not active yet
status	Lists all users on the server, with Steam ID details.
sv_maxspeed	Sets the speed of the players.

For easy administration of your CS2 server we recommend: CKRAS BOT (pre-installed)

Find all availible CS2 CVARs in this Guide:

Get your CS2 Gameserver here- www.ckras.com

Configs / Use own configs

Here we would like to briefly explain how you can install configurations yourself via FTP or, in the near future, via the webinterface.

Webinterface

We will soon be offering options similar to CSGO that will allow you to install a selection of configs at your convenience. Please understand that we still need a few days for this, but you are also welcome to send us your desired configurations to support@ckras.com so that we can check whether we can add them to the selection.

Thank you for your help at this point.

FTP Installation

Every customer has full FTP access to his server, please click on "edit" in the web interface (see picture) and on the following page you will find the field "FTP accounts" in the upper tab, just click here and take the FTP data. Please always use the default port 21 for the FTP, then simply enter your configurations in the folder:

/cs2/game/csgo/cfg

Afterwards you can call up your configs with the command exec "NAME.cfg" - Example: exec practice.cfg

CKRAS BOT (!exec name or !config name)

CONFIG NAMES

SOON!!!

We will prepare some Config Names in the next couple of days, including a option to install these files ease via Webinterface

EBOT

EBOT is now available for CS2, alternative use our CKRAS BOT System.

Alternative: FAKE RCON to mange your gameserver

Server-Port

All CS2 servers are operated with different ports at CKRAS, you can find your port in the webinterface.

Tickrate

We start the servers with -128 tickrate, but after Valve limited these values with CS2, we rely more on higher CPU and RAM allocations, so that our customers get an advantage over the Official Gameserver.

Workshop

Currently not active in CS2

++ You can ease install maps via Workshop ++
With this simple "Workshop" Guide, we explain to you how to install new custom maps on your gameserver with simple commands.

GSLT

Not yet needed for CS2.

++ Valve Steam ID GSLT for your Gameserver, this key is obligatory to start your CS2 Gameserver. ++

GameServer Login Tokens (GSLTs) - Please go through our GSLT guide step by step to successfully register your game server.

Plugins

CKRAS BOT - (DEFAULT ADDON BY CKRAS - Help you to Administrate your Gameserver)

FAKE RCON - (Plugin to use RCON Commands)

EBOT - (Ebot Released for CS2)

Gameserver

Testserver

You want to test our servers, please contact us via support@ckras.com - thank you.

Smartline - Entry Server - EPS Server - EPS PLUS Server

CSTV

Activate CSTV (Guide) for your CS2 Gameserver from CKRAS. You have a GOTV - CSGO, or another TV-Server, then check here.

TRAILER CS2

https://youtu.be/nSE38xjMLqE?si=tQdtO8ftfOfLsUmo

→ Mainarticle: Gameserver