Traceroute

TraceRoute / Route tracing

TraceRoutes can be helpful in determining where problems occur in the connection process by checking the data stream from your computer to a CKRAS gameserver, voiceserver, etc. A TraceRoute shows the step-by-step path a data packet takes on its way to its destination.

A route trace shows step by step the path a data packet takes on its way to its destination.

CKRAS can use a traceroute to detect whether there are problems with the routing and whether there are any optimisation options to reduce the latency (ping time).

It is important that you also send your IP address (wieistmeineip.de) when creating the traceroute so that we can check the counter-route. Thank you very much

Create a route tracing / traceroute

cmd (Windows Console)

tracert YOUR IP from your(Gameserver, Voiceserver) or example: tracert ckras.com

tracert ckras.com
Route tracing to ckras.com [xxx:232:55]
over a maximum of 30 hops:
 1 <1 ms <1 ms <1 ms xxx] 
 2 1 ms 1 ms 1 ms           2003:0:8802:a800::1  
3 * 11 ms *            2003:0:1306:8000::
4 10 ms 10 ms 10 ms          2003:0:f00::592
 5 10 ms 10 ms 10 ms 10 ms         2a01:440::2:fff8:2
 6 10 ms 10 ms 10 ms 10 ms        ckras.com [xx:232:55]
Tracing completed.

This result please sent to support@ckras.com - and in the best Case sent us your Local IP by visiting this Page https://www.ckras.com/deineip/

CMDS

Click Search and insert (CMD)

Right-click on the command prompt and then select Run as administrator.

Now enter the command tracert ckras.com > .\Desktop\tracert.txt in the command prompt and press Enter.

Please wait. The process may now take a few minutes.

A file with the name "tracert.txt", which contains the route tracing information, will now be created on the desktop.

Now enter exit and press Enter to close the command prompt.

Get your Gameserver for CS2 on www.ckras.com

Alternativ kann auch ein Tracert über HLSW erstellt werden.